This is, it seems to me, a fair question which deserves a serious answer. Just because it can be done doesn't mean it should be. An HF transceiver is not a scanner, after all; it has a tuning knob and a lot of front panel controls
which don't have computer equivalents. Why then be bothered with computer control?
My answer, based on my own operating experiences is: because computer control allows you to separate tuning from listening in a way that is simply not possible from the receiver front panel. Plus, once the radio is linked
to the computer the same cable can also be used for other functions like logging and loading memory channels, and there is no practical substitute for a pc in handling large memory sets like the 100 channels of many Kenwoods.
Finally, an external control program can create links between radio functions not usually related, as well as links between radio functions and the outside world.
(1) TUNING SEPARATED FROM LISTENING
Contemporary Kenwood HF radios have two vfos, but the radio's front panel only displays one and the controls operate only on the displayed vfo. The other vfo is still 'live' but you have no access to it.
A control program like Kentrol can display the status of both vfos simultaneously, along with the configuration of the currently selected memory channel, and it allows you to select which vfo the program manipulates independently of which you are listening to. In Kentrol vfo a, vfo b and mem are referred to as 'Sources'. The source being heard is called the 'Active Source', while the source acted on by control commands is the 'Tunable Source'.
Most often, of course, the Active and Tunable sources will be one and the same but you will find that it is very convenient to, for example, tune vfo b to the latest dx spot on the packetcluster while continuing a qso on vfo a.
A separate but related benefit is that you can change the mode even when mem is the Active source. This cannot be done from the front panel of the radio, and is especially handy for sw broadcast listening.
(2) MEMORY MANAGEMENT
This is perhaps the strongest reason to connect your radio to your pc. The horrible ergonomics of keypad frequency entry on Kenwoods (and all other HF radios except the Lowe HF-225, which has a separate keypad) make entering the
contents of 100 memories sheer torture. Even if some way of backing them up was provided, it is hard to imagine anybody switching manually between different memory sets.
A pc totally transforms this situation. At worst, you type the memory contents in via your computer keyboard. More likely, a database program or spreadsheet can be used to import data acquired on diskette or by modem. There
are excellent specialist database programs available. Any terminal program that can do an ASCII file transfer can load the settings into the radio.
Now you can have an unlimited number of memory sets on hand, organized in any way you want.
Kentrol can read the contents of the radio's memories to a window or a file, allowing you to attach comments to each channel. You can create new memory sets from the keyboard or by importing frequency and mode information from text files via the Windows clipboard.
There is an extra advantage for TS-940S owners. That radio has four banks of ten memories and requires that bank and channel be selected separately. The bank switch is on top of the radio! Kentrol handles all the mechanics of bank and channel numbering and provides the user with a set of 40 consecutively numbered memory channels, all equally accessible.
(3) LOGGING
Computer logging doesn't do anything you can't do by hand, but it certainly is convenient.
A fairly basic logger is built into Kentrol. It logs the correct UTC date and time, frequency, mode and your comments. I will happily accommodate DDE links to more elaborate logging programs when they come along.
(4) LINKS BETWEEN FUNCTIONS & WITH THE OUTSIDE WORLD
There is little or no interaction between the major controls of your radio for the excellent reason that fixed interactions are impractical, undesirable, or both. A successful exception is the way the TS-440S switches from lsb to usb when you tune past 10 mhz but accepts your override without protest.
Interactions which take place in software on your pc have none of the problems of built-ins and offer many interesting and attractive possibilities. Software links are flexible and dynamic and they can be turned on and off, so we aren't limited to what is appropriate full-time.
Kentrol links radio functions intelligently through its software tuning modes.
In Kentrol's 'Band' tuning mode, the tuning step and range depend on the frequency. The available tuning range changes from the receiver's full range to just the width of the band, if any, in which the tuned frequency falls.
If the tuned frequency is not in a ham or bc band, clicking the 'Band' button does nothing. When it is in a band, the tuning step is also changed by Kentrol. Normally 1 khz, it becomes 5 khz whenever the tuned frequency falls within a sw broadcast band. In the MW band the step is 10 khz.
The 'Sub' mode in Kentrol goes one step farther, to set the mode to match the frequency within defined sub-bands. And to allow you to 'jump' from one band to the next and stay in the correct sub-band. So, for instance, if you
switch to 'Sub' mode when the vfo is tuned to 14.265, Kentrol will automatically set the mode to usb and set the tuning range to the 20 metre ham band. Then, if you click the 'Jump - Up' button, the vfo will go to 18.110, which is the start of the phone portion of 17 metres. If you click the 'Jump - Dn' button from 14.265, Kentrol skips the 30 metre band because it has no phone sub-band, and takes you to the start of 40 metre phone.
The links implemented so far in Kentrol are fairly basic, but will gradually become more sophisticated. Instead of a fixed 10 khz tuning step in the MW broadcast band, the setup menu will allow the user to choose either a 9 or a
10 khz step. Similarly, instead of only the CARF bandplan for the HF ham bands, it will be possible to choose a US or other bandplan.
